Timney 533 ST - two stage trigger

Firearms repair, customizing/tuning and new builds... Sponsored by Riva & Brutti
User avatar
lovec_SK
Posts: 87
Joined: Mon Jan 04, 2016 11:27 pm
Location: Slovakia

Timney 533 ST - two stage trigger

Postby lovec_SK » Sun Jul 17, 2016 7:36 am

Does anyone have personal experience?

http://www.snipercentral.com/timney-533 ... er-review/
Every Shot Counts...
9,3x62, .300 Winchester Magnum, 7mm Remington Magnum, 7mm-08 Remington, 6,5x47 Lapua, .243 Winchester, .223 Remington

User avatar
Deerhunter338mag
Posts: 469
Joined: Sat Dec 13, 2014 1:32 pm
Location: Australia Melbourne

Re: Timney 533 ST - two stage trigger

Postby Deerhunter338mag » Mon Jul 18, 2016 12:29 pm

I've only ever used jewell triggers but I did have a tikka once with a set trigger that was really pretty cool worked well
Aim small, miss small

dchamp
Posts: 110
Joined: Thu Dec 11, 2014 2:51 am
Location: California

Re: Timney 533 ST - two stage trigger

Postby dchamp » Tue Jul 19, 2016 3:31 am

I don't have experience with that particular model but I do have a Timney trigger that I put on my son's Remington 700. It works great, it's crisp with a nice clean break and no noticeable over travel. They are known to make a quality product. I wouldn't hesitate to use/buy one if I was in the market for one.
TO RIDE, SHOOT STRAIGHT & SPEAK THE TRUTH - COL JEFF COOPER

sav338
Posts: 100
Joined: Tue Jun 02, 2015 9:57 am
Location: Australia

Re: Timney 533 ST - two stage trigger

Postby sav338 » Wed Jul 20, 2016 6:40 am

I have an older single action timney trigger on my 338win mag and am happy with it, nice and crisp , but I've never taken long shots with it .
It was my stalking rifle and now just sits in the gun safe.

RifleTuner
Posts: 64
Joined: Thu Dec 25, 2014 9:31 pm
Location: Australia

Re: Timney 533 ST - two stage trigger

Postby RifleTuner » Sat Jul 23, 2016 6:22 am

Sorry, thats one thing I cant help with. I hate shooting with a 2 stage trigger. Tried it, didn't like it - have used a single stage trigger ever since.


Return to “Gunsmithing”

Who is online

Users browsing this forum: No registered users and 0 guests